A walkthrough of bringing up a basic embedded Linux image in PetaLinux 2019.2 for the Snickerdoodle Black with piSmasher baseboard.
I want to develop a RP2040-based IP camera, and do application development based on the cloud platform.
I created a project for code development on the subject of vehicle tracking. It has a Linux computer and GSM board which includes GNSS/GPS.
This project shows how to use an lwIP server on the SP701 to be able to send it commands/data on a local area network (LAN).
This project is Time clock system using fingerprint and Network Time Protocol via ethernet.
PSoC4 BLE receives OTA data and is sent to FM4 over UART and then to PC over Ethernet. FM4 also sends Ethernet data and is converted to BLE.
First step towards Home automation
Transformerless connection using Wiznet W5500, W5100S
Digital thermostat for the burner and boiler. It has a remote monitor via an ethernet interface. It needs an ethernet module for Arduino.
This device can help you view your current stock holdings through a small screen.
Single Pair Ethernet (SPE) is a technology that enables the transmission of Ethernet data over a single twisted pair of wires.
An IP hardwired Nurse Call System based on WIZnet Ethernet HAT + Raspberry Pi Pico
A module that can easily connect Ethernet to the MCU you want. PoE can also be easily connected if you want.
This project aims to replace traditional bar code scanners with RFID sensors and implementing a graphical interface to make things easier.
The W5100S-EVB-Pico has the same role as the Raspberry Pi Pico platform and includes W5100S, so the Ethernet function is basically included.
(1)-Temperature measurement data transfer W5500 Ethernet Shield (Raspberry Pi Pico) - Server(Python)
Omega2 is small and powerful Linux board. But it has few GPIO. I prepared dedicated MCU and RF chip to collect data for it.
Simple method to SSH Raspberry pi from Ubuntu
Digital Safe Box using Raspberry Pi RP2040, W5100S and FingerPrint
Control Multiple tap to turn on and off the electric fan with Web server with WIZwiki-W7500 board
From secure TLS device based on Trusted Objects-Avnet TO136 SE to AWS IoT, using NXP K64F board.
Quickstart tutorial with instructions to use an USB to Ethernet converter on NL668 OpenLinux.
In some embedded control applications you can replace Raspberry Pi 4 with a Pi Zero with this Ethernet interface board.
This project walks through how to configure the TE0711 SoM to boot from its QSPI external flash memory using the TE0701 baseboard.
