WiFi weather station with sending data on line and graphical rendering of them.
In this tutorial you will learn how to set up Qt environment to build and debug applications created in Qt Creator for Xilinx Ultra96 board.
This project will show you how to use a TFT Screen.
A 3D scanner that makes 3d models in a graphic interface .
Graphics Library to draw, scroll & control text or symbols on multiple 8x8 LED Matrices.
Learn how to connect an SPI LCD display to your Meadow board to draw shapes, text and images with the Meadow. Foundation Graphics Library.
An extension to my Altair 8800 simulator project, allowing it to simulate the Dazzler graphics card released by Cromemco in 1976.
Vectron VGA Plus is a VGA graphics adapter that can interface with retro computers or microcontrollers.
Learn how to build this cool obstacle radar using a TimeOfFlight distance sensor, servo, and display, all controlled with Meadow. Foundation!
Use a MAUI sample app on your phone to configure Meadow's WiFi over Bluetooth.
Learn the basics of using the lightweight, MCU-optimized Meadow. Foundation HMI UI library with Meadow, MicroLayout.
This is a Noname graphical LCD display salvaged from an unknown device. We are going to figure out its pinout and try to interface it.
Graph any data on your own 3D bar chart in seconds. Just edit two variables and personalise the colours.
Watching primes born was never more exciting, or slow.
This project is about an arduino controlling the smartGPU2 intelligent graphics processor and creates an smart phone like interface.
A holographic cube that can display an object and be able to rotate it using hand gestures.
This tutorial shows how to use the data collected from LoRa nodes into beautiful graphs and visualization using Node-red and Grafana.
This project proposes the creation of a graphics library in order to generate and manipulate the graphic information only using VHDL.
A chiming and graphical animation clock based on a 32x32 RGB matrix and Adafruit FX Sound Board.
Here are the few examples of simulating Serial plotter examples on Wokwi Arduino simulator
You'll get an Arduino-compatible graphical LCD display for a low price and with minimal soldering skills.
Easily generate a VGA signal for your Arduino projects.
Learn how to get temperature, pressure, and humidity readings from BME280 and Raspberry Pi.
Using one byte to hold all the color data for a single RGB LED.
