A weather monitor system that uses sensors to show the temperature, humidity, and air quality.
Distributed Indoor Air Quality analytics based on tags and open-source hardware and software with ability to integrate existing buildings.
Using websockets on Raspberry II connected to wifi, I send temp & humidity data to a chart setup on HighCharts.
Sending temperature and humidity data to Google Sheets using Ubidots for predictive analysis.
A heart rate sensor that measures BPM and SPO2 and a temperature and humidity sensor. All data are displayed on the TFT touchscreen.
This guide shows how to collect HomeKit data and log it into a SQLite database on a Raspberry Pi.
It monitors if the humidity lies in the specified range, if not sends a alert message via Telegram and even gives out an alarm using buzzer
This project uses an LCD screen and DHT22 to display temperature and humidity data, simultaneously collected from two different locations.
In this study, hardware design using an ESP8266 microcontroller as sensor node and an Intel Edison microcomputer as a broker.
The easiest humidity monitor you will ever make. Be ready to go in less than 5 minutes!
Temp And Humidity Measurement W/ Node MCU, DHT & Blynk
Shows relative humidity, temperature and pressure readings so you can see the correlation between them vs relative humidity.
Clothes dryers waste heat by venting it to the outside world. Reclaim that heat after the humidity of the air has dropped to safe levels.
Secure, robust, tinyML based delivery of agricultural products to its valid consumers is the most important step for our AREC.
Simplest IoT temperature and humidity meter allow you to collect temperature, humidity, and heat index. Then send them to Adafruit IO.
Record the changing temperature and humidity values in Excel using Surilli GSM and a tool named as "Tera Term."
This tutorial shows how to build weather station from Magicbit using Arduino which can get details from your smart phone
This a simple Humidity Checker from ground-up within few minutes of using the Breadware's prototype hardware without any prior knowledge.
A simple tutorial and setup for this multi-function module, with a built-in thermostat, humidity sensor, clock and alarm feature.
Read humidity and temperature using T9602-5-D-1 sensor through ethernet. Compatible with any HTTP capable controller (Home Assistant, etc).
Monitoring the humidity and temperature of the given surrounding.
Record the changing temperature and humidity values in Excel using Surilli Basic M0 and a tool named as "Tera Term."
In this tutorial we will make a simple Weather Station using GC9A01 SPI Display, DHT11 Temperature & Humidity sensor, Arduino and Visuino.
I like kits just because of the principle: if they are thought out and put together quickly, they are also suitable as gifts for beginners.
