This project details the installation and setup of Microchip's FPGA design tools Libero SoC Design Suite 2024.2 and SoftConsole v2022.2
A reference guide for installing the 2024.2 version AMD FPGA toolset on Ubuntu.
Walking through the setup of the SDR Zmod on Eclypse Z7 for SDR development using GNU Radio.
I installed various EE design applications on the Ubuntu 22.04 desktop image of my KV260 including KiCad, and laid out a custom PCB with it.
This project walks through how to install an emulation of x86 Ubuntu in a VM on an M2 Mac and install Vivado, Vitis, & PetaLinux 2023.2.
How to create your own PetaLinux using a Virtual Machine
This project walks through the base workflow for accelerated application development on the Kria KD240 in Vitis Unified 2023.2
Making the Honda Awareness AI Traffic Light from scratch with Edge Impulse
This project shows how I used TI's SK-TDA4VM and Edge AI Cloud tool to train a human pose estimation ML model to judge my yoga practice.
This project walks through how to implement and use SPI in embedded Linux via the spidev kernel on the Zynq-7000 using PetaLinux 2022.1.
This project walks through how to get up and running on the ZU Board using Avnet's build scripts for Vivado & PetaLinux 2022.1
This project details how to develop an embedded Linux image for a MicroBlaze design on the Arty A7 in PetaLinux.
Train an artificial eye with Machine Learning to monitor analog knobs positions in audio consoles
This project walks through how to install Edge Impulse on the Ubuntu 22.04 image of the Kria KR260 and the development of a basic ML model.
This project is a 5.1-channel, analog audio processor based on PT2322 and Arduino Nano.
This project demonstrates how to implement a custom PL design on the KR260 utilizing its RPi & PMOD connectors.
This project walks through the creation of a custom Vitis platform and an accelerated application for the Kria KR260 Robotics Starter Kit.
This project walks through how to set up a generic project in Vitis 2021.2 to debug FPGA accelerated applications using SW & HW emulation.
iNap Malinka is a Raspberry based handheld with the NRF24L01+PA+LNA radio module, running RetroPie!
This project walks through how to build a custom hardware design for the Kria KR260 Robotics Starter Kit in Vivado 2022.1
How to update the boot binary on the Kria KV260 using the Ethernet recovery tool so Ubuntu 20.04 is more stable and installing Pynq.
Typewriter sounds, animated words and ASCII pictures for this Raspberry Pi based Gonzo tribute art installation
This project walks through installing Ubuntu 20.04.3 Desktop on the Kria KV260 Vision AI Starter Kit and using Edge Impulse with it.
This project walks through how to generate an embedded Linux image with the Yocto-based PetaLinux tools from Xilinx for the ZynqberryZero.
