He is welcome back again this time we are making a fire fighting robot also we have made a firefighting robot earlier but this time we did
Build a smart parking gate with Arduino UNO, ultrasonic sensor & servo motor. Detect vehicles and open/close the gate automatically
Build a mini rechargeable Dremel tool that also charges your phone! A perfect 2-in-1 DIY tool for cutting, drilling & powering devices
"If you're going to eat sushi anyway, you want to eat non-rotating sushi! But you can't go to a sushi restaurant without money. Have you eve
This is my next project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.
Minimalistic Emergency ventilator with fine control over BPM, tidal volume and flow rate, with a digital interface.
The making of a large 3D printer (400x400x400 mm) for a college project.
A firefighter Arduino autonomous robot which is capable of detecting, approaching and extinguishing fire.
Make a program for the Arduino Pro Mini in Visual Studio to control motor speed with PID which can archive it exactly.
Use a PID Controller to monitor a wheel's speed and consistently reach the desired RPM.
This is a model circuit that can control the speed and the direction of a dc motor without the h-bridge ( it's an alternative to h-bridge ).
Simple Raspberry Pi web-controlled robot with video live streaming.
An 11mm diameter motor made from a printed circuit board.
A small car based on Arduino platform which can be controlled using Bluetooth and a Android app.
It's a simple project done by using Arduino Uno R3. Now I'm trying to modify its functionality.
A basic model train layout containing a passing siding with a train running around and stopping in an automated sequence.
Control the servo motor by using the ultrasonic sensor.
I designed this stepper motor with eight electromagnets, six neodymium magnets, with a 3d printed rotor and stator housing.
Use an Arduino MKR1000 to maintain a constant temperature in a charcoal smoker and allow monitoring over Wifi,
Replacement for broken mechanical timer of a washing machine with electronic timer.
Allows precise control of the throttle speed and the ability to run pre-programmed trolling routines.
This is my homemade CNC machine using Arduino, Easydrivers and old CD-Rom(s). I use Grbl and G-Code sender to execute the G-Code.
Billy Bass and Alexa combine in this project to form a full bodied virtual assistant.
Simply the machine has four types of candies and each type has it's special code, you should tweet with this special code to get your candy.