A comprehensive guide on how to use the XY-MUP module with a full coverage on all of its modes and individual functions.
A simple tutorial to set up ICStation's DC to DC automatic boost buck converter (5 - 32V to 1.25 - 20V 5A) for electronic use.
An easy-to-make, solar-powered shield for the ST Nucleo shield.
Here I create plasma inside an old filament bulb by using a high voltage power supply from ignition coil.
I made a custom power bank that solves battery mounting, connection, and charging and provides a steady 5V for powering your project.
"Allows for the safe and orderly shutdown of a Raspberry Pi and any attached hardware"
Showcase on how to go around building your SMPS
Today we don't break anything, we open it and have a look.
Building a case for the popular 9.99A 30V 60W Constant Current Electronic Load & Discharge Battery Capacity Tester
A variable power supply is incredibly useful in electronics projects, allowing you to fine-tune voltage to meet your circuit’s requirements.
How to make your own power supply using a transformer. Learn about transformers, rectification, smoothing and regulation.
let's build joule thief
In this post I’ll show you step by step procedure how I build my own LM317 based variable voltage regulator. which can convert 230VAC supply
Become a PCB master.
This project evaluates the low cost ZK-PP2K High Power PWM & Pulse Signal Generator module
A power supply that can deliver 100w from a fast charger the best and smallest possible solution for lab bench supply.
A battery charger circuit for charging any kind of 12v battery
Spark Analyzer is a compact, sleek, IoT-enabled USB-C Power Delivery device with built-in power analyzer capabilities.
Made a small PD 5V Buck Module for powering high-power devices like the Pi5, Latte Panda, etc. PD Output between 3V to 12V.
In this video I will try to briefly explain how to build a complete device, as well as some of the more important features.
Using a 100% DP charger in your electronics projects has never been so easy, now you can do it with a CatSink board.
The TPS54202 is a highly efficient 2A synchronous buck converter with a wide 28V input voltage range and low EMI figures
In This project we are going to make a Variable Lab Bench Power Supply.
Multiple Output Power Supply 2x RK6006 and fixed symmetrical 5V, 12V and 15V
