This is a tutorial on how to make it work.
Extension to Ben Eater's breadboard computer that allows saving/loading programs and works as a monitor, assembler and disassembler.
Say goodbye to library errors & delays! Build an ESP Offline Programmer to flash ESP32/8266 firmware anywhere, no PC needed. Fast & reliable
Using some external software we an easily get the code back from Arduino, but this time the code is in the form of HEX file
In this project I will guide you on how to make your own Arduino Chameleon using TCS3200 and Arduino Uno.
Add OpenWCH boards package to your Arduino IDE and program RISC-V chips.
Learn the techniques that reduce memory usage allowing your programs to run smaller Arduino based systems.
This project allows the easy programming of the widely used ESP-12 module and its smaller brother the ESP-03 module.
Learn how the build your own WiFi switch with the ESP module and how to control any appliance of your favorite place.
I made this really amazing PCB for INTEL 8051 microcontroller in the form factor of an Arduino UNO. See how to build your own one.
A programmer designed for easy programming of ATtiny13, ATtinyx5 series ATtinyx4 series, ATtiny2313, ATmega8 series, ATmega328, ATmega8515
Raspberry Pi Zero 2 W runs at a default speed of 1GHz. It's possible to increase the speed to 1.2GHz or even 1.4GHz.
AVR-HV2 is an Arduino-based high voltage parallel programmer for AVR microcontrollers.
Using the $2 (Blue Pill) STM32 board we can have a debugger that supports breakpoints. No need of OpenOCD, as it runs GDB on-chip.
Are you tired of connecting programmer every time you want to change some functionality of your robot? Why not to try wireless programming?
Create your multitasking robot! This project demonstrates the rich capabilities of the micro:bit board for the robotic car development.
Build an actual Arduino using your breadboard! Yes, this Arduino actually works!
Classify various traffic signs using Deep Learning
A 3-story elevator with a mechanical door made from Lego Mindstorms and programmed on RoboCore. It moves up and down and reacts to buttons.
Landje Robot is an fully open source STEM robot. It deviates in two aspects from many other builds. See here where...
This project will allow you to display a battery level and current date and time on the OLED expansion.
How to programming a SAML21 with OpenOCD and DapCat Programmer.
It was created as an Arduino WiFi module, but it's more powerful than an Arduino.
Creation of ready-made low-budget infrastructure for developing, manufacturing, and adjusting electronic devices
