Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
In this project I made a touch sensor using a coin that works based on Arduino Capacitive Sensing Library.
I am going to show you how to make a simple obstacle sensing system with cheap parts like IR LED and photo diode.
Two versions based on Grove Light Sensor, one is reset by a push button, the other one requires a passcode
Using the Actobotics Runt Rover Peewee chassis kit and an Arduino controller, motor driver and sensors from eBay or other vendors.
Hear a "beep" if someone gets too close!
Build a proximity sensor using aluminium foil and a high value resistor.
This is a start guide for using the GP2Y0A02YK0F distance sensor with Arduino and TFT Touch Screen.
The LED is on when no interference is detected.
A very basic project composing of a Sharp infrared proximity sensor hooked up to an Arduino with a few lines of code; for a perfect newbie.
When my ultrasound sensor stopped working, I decided to improvise by making an obstacle avoidance bot using IR sensors (cheaper too).
Measure in both metric and imperial + OLED
A quick halloween scare prank using an Arduino, HC-SR04 ping sensor, and a servo. A spider drops on anyone trying to ring the bell.
Infrared Proximity Sensor could be used in a wide variety of applications commercially, one of them being the reverse parking distance sensor
A small decoder which can decode the NEC protocol signals from your TV remote in Hexadecimal form. A small project with proper library/ code
This IR Proximity Sensor can be used for obstacle sensing, color detection, fire detection, line sensing etc and also as an encoder sensor.
Host a Node-RED server on an Android phone to get all the phone sensor data, and upload it to Power BI for data analysis.
In this tutorial we will use Inductive Proximity Sensor and a LED connected to Arduino UNO and Visuino to detect metal Proximity.
What if a regular M&M's dispenser was changed to automatically serve the chocolate candies? Let's go for it!
Follow this tutorial to set up your Pi Cap with a Raspberry Pi Zero.
Raspberry Pi can be a good environmental monitor and can forbid you to drive if you're drunk.
A quick, fun project with a few components and a few tools to eventually make a circuit that can be used on a DIY robot or on its own.
This is a touchless hand sanitizer, which uses IR sensor to detect motion of hand
In this project, I'm going to explain how to make a simple IR proximity sensor using IR LEDs and LM358 Dual Op-Amp.
