The days of the traditional lock-and-key door locks are a thing of the past with RF-controlled door locks at the touch of a button!
This FPV antenna plotter plots the 5.8GHz video coverage of your antenna in distance, based on actual coordinates (of your flying path).
A cybersecurity tool for RF scanning, copying, and replaying signals
This project walks through basic RF test measurements using the Zmod Digitizer with WaveForms from Digilent.
The way to create Low Noise Oscillatror Sinus Wave up 500 MHz, CMOS up 150MHZ, HSTL 1GHz based on DDS from Analog Devices - AD9912
An 11 elements Yagi antenna with 14dB of gain for 868-915Mhz, tunable, useful for Lo.Ra., OGN, Fanet, Flarm, Meshtastic, Helium, Miner, etc.
"If I have seen further, it is by standing on the shoulders of Giants. " - Sir Isaac Newton
Are you sure that your boss pay you all your work?
Omega2 is small and powerful Linux board. But it has few GPIO. I prepared dedicated MCU and RF chip to collect data for it.
Metageek makes the Wi-Spy a spectrum analyzer for WiFi frequencies. For this project you need to have a device.
Versatile gate/garage door opener for under $10.
This project walks through how to create a Vitis 2021.2 hardware accelerator platform with GNU Radio Toolkit for AXU2CGB board made by Alinx
A table lamp that can be controlled by radio frequncy. Measure light level and dimmable by 64 steps.
Construction of a terrestrial drone or inspection or rescue rover, equipped with the RSL10-SENSE-DB-GEVK sensor module.
A non-invasive device to find your friends by indicating how close you are to them. Best Project Award Digi-Key Award Altium award.
Based on sensor data open/close window via actuator and turn on/off fans. App via Blynk platform. Entirely solar powered.
An XBee shield for HMTRP chips.
This project explores the world of RF of which I am very passionate about. We are going to receive and decode FM radio signals using an SDR.
This project walks through how to measure spurious outputs from a DDS chip to gauge the amount of quantization error of it.
PCB Board to adjust an antenna to determine the gain and the transmitting range of radio controllers.
