You'd think that solar energy and clouds are not the best match, but in this project I'll show you how you can make it work!
Save energy and heat your pool with the power of the sun. A coil of dark tubing and a pump are all you need, but why stop there?
Evaluate the possible magnitude of solar energy by the light intensity in a given direction to charge batteries efficiently.
This kit get charged from solat battery and provides information about temperature, light level, CO2 level and moisture level of the soil.
This eye-catching and lightweight nylon messenger bag can charge your devices on the go.
With solar panel, diode and NiMH batteries you can do a simple hack and recharge batteries in HARDWARIO Battery Module
In this project I tried to overcome a very common issue while working on a portable electronics project. That is how to power my circuits
Get notified by your Hot water solar boiler !
This small tool checks brightness, and if there is fog or night out, will turn on without human action or worry.
A line follower with a arm and A extension trally with arduino uno R3
12v Solar Generator using a Victron BlueSolar MPPT 75/15 Solar Charge Regulator & Arduino-based GUI for Info Display.
Gutters to Gardens is a solar powered rain barrel for remotely or automatically activating a water distribution system for home garden beds.
An automated light.
This outfit has a solar panel on the shoulder which can charge a 5V device, like a phone, a speaker, a portable charger, etc. through USB.
Always face a solar panel towards the sun and collect telemetry by using Particle's Monitor One and a pair of stepper motors
Wouldn’t it be really cool if you can charge your mobile phones battery using the sun instead of a USB charger.
Will guide you to build a LoRa E5-powered solar PV monitoring system with Blues cellular IoT and Qubitro cloud.
Heats a hot water storage tank using excess solar energy, topping up with off-peak imported power when needed.
Learn how to make a light tracker of your own that always points in the direction of the light falling on it.
Charge USB devices from a solar panel-powered battery for any size solar panel.
This is a solar tracking charging system for the DSTR robot. Sponsored by Texas Instruments and Texas A&M.
This is a pilot program which displays 4 main values from data obtained from the VEDirect serial port of the Victron MPPT Charge Controller
PV panel simulation for tracking solar movement.
Monitors a leopard trap door and occupancy by means of internal or external sensors.
