With USB-C Type, not only USB communication but also Ethernet!
Add Python programmable GPIO pins to any computer with USBgpio.
This project is a 5.1-channel, analog audio processor based on PT2322 and Arduino Nano.
This project walks through the details of adding the hooks for the hardware on the KR260 carrier board in a Vivado 2022.1 project.
StarPointer is a DIY virtual electronic finderscope for astronomical telescopes.
This guide will walk you through creating a USB microphone on the Raspberry Pi Pico using the RP2040's PIO, DMA, and USB capabilities.
A small Micro USB connected power supply that is designed to fit onto the power rails of a standard solderless breadboard.
MaaXBoard and MaaXBoard Mini run Yocto! Here's how to get started.
Show status information, change NW credentials, ping your gateway, show sensor values or get more details by activating debugging…
With a code size of 1KB on an ATtiny13A MCU, this tiny module measures voltages up to 22 volts and current up to 5 amps.
This Cheetah 125 joystick from the 1980s has had a full USB conversion and is now ready for some serious RetroPie gaming action.
Step up your prototyping game with this awesome USB Raspberry Pi Zero (W). Program on the go like a PRO!
I needed a power bank for running my USB powered synthesizers at the campfire while off grid and for hours at a time. Here's how I did it.
A 10.8A, 4-port USB charger with a wattmeter and adaptive intelligent charging.
Connect your Raspberry Pi to the world through cellular with the Hologram Nova.
This project shows a simple FM4 Mass Storage device developed using the USB Wizard tool
Plug in any combo of up to 4 NES, SNES, or N64 controllers, use them as USB HID joysticks.
