PGEZ Zero is a compact 16 channel GPIO Expander based on the PCA9671, offering up to 64 different I2C addresses.
This project takes you through all the steps required to get your RAK831 LoRa Gateway module up and running with WiFi as the backhaul.
How to Control Raspberry Pi Camera and GPIO pins with Telegram APP via the Internet
A Coca-Cola machine accepting Bitcoin via the Lightning Network.
This project is an Arduino gps tracker source code for AVR boards and A9G (GPS/GSM/GPRS) module with spy microphone and google map api...
A smartphone App that uses new MIT App Inventor BLE extension to connect with a Feather M0 Bluefruit LE and control up to 6 GP-Os
All open source, no coding, remote accessible DIY automated smart irrigation.
SOFTPWM : DMA+GPIO, not interrupt based, individually controlled, did you ran out of PWM pins?
Measure the color of an object using a color sensor, and speak the color using an audio output.
A button on Tessel's GPIO bank
Add Python programmable GPIO pins to any computer with USBgpio.
Petalinux 2022.2 GPIO project for KR260, Kria Robotics Board.
Simple Flask application to control GPIO@OrangePiZero over HTTP GET method.
Welcome to the embedded world! Let's start exploring STM32 microcontrollers!
Open your garage door with your smartphone or smartwatch!
What good is a robot without being able to control it? In this post, I go through custom GPIO setup & use, from Vivado to python code.
Capture and analyse pictures using Raspberry Pi Camera Module and Computer Vision API and display results on LCD.
Keep your Pi cool by having it turn on a fan whenever it gets hot.
Use a multiplexer IC to break out four GPIO pins into 16 outputs. Perfect for an ATtiny project!
How to set up the Xilinx ISE Design Suite to compile FPGA code, and get started with Verilog programming on the SPARTAN-6 on MATRIX devices.
This project describes the steps to enable UART access on the Wiscore Alexa Board and communicate with an Arduino board directly via serial.
Based on the W5100S-EVB-Pico device, adding Azure IoT functions for using Azure IoT Central commands and controlling an external device.
If you require more pins for your project to connect more buttons, sensors or LEDs, GPIO expanders can help.
Run a powerful open source Operating System on Arduino Zero to blink an LED on the board and open up a whole world of control capabilities!
