A PocketBeagle powered guitar (clone) hero controller
pedalSHIELD UNO is an Arduino UNO programmable guitar pedal. You can create your own effects and digital sounds.
8Bit Digital Delay / LO-FI Bitcrusher / Reverse Speech DSP Pedal Effects for Guitar, Voice, Synths, etc.
Neopixel LEDs are fitted behind the guitar pickups and illuminate with the rhythm of your strumming allowing for a custom and unique design.
PedalSHIELD MEGA is an open-source Arduino MEGA programmable guitar pedal. You can create and share your own effects and guitar pedals.
Let's put together this guitar shield for the Arduino!
Use an Arduino to add digital effects on-board your guitar!
I wanted motorized glissandos on electric guitar stings, so the best solution was to hack already available self-tuning systems 😛
This foot controller with a Wah pedal, a preset switch and a few extras acts as a regular MIDI controller that works in all DAWs and VSTs.
Lets make a programmable guitar pedal, using all the power from the Arduino DUE board with 12 bits ADCs, DACs and RAM memory.
Making music with a keypad? Seems like a weird idea! But we will see with the good software, we can even make an electric guitar out of it!
Building my first tube amplifier, on a tight budget.
Project uses an Arduino Uno and a pair of stepper motors to wind tonewheel organ pickups.
A controller to change effects scripts on the Pedal Pi using a Circuit Playground Express board.
Let's rock with a DIY bass guitar amplifier, no IoT, no coding, no AI, just pure analog audio like the good old days.
These USB dongles are microphones for your guitar. The little CD turns your PC into a Guitar Amplifier/PA system.
Use your Raspberry Pi as a guitar effects pedal. Configure and control PiPedal with your phone or tablet over a Wi-Fi Direct connection.
The DS-Pi is an open-source RP2040-based audio digital signal processing platform
This programmable guitar pedal works with the Raspberry Pi ZERO board and it is made to experiment with sounds and learn about digital audio
The Dual Loop allows you to alternate between two different effects loops. It provides two switchable loops (send/return) with a footswitch.
NeuralPi is a Raspberry Pi guitar pedal using neural networks to emulate real amps and pedals.
This is a stompbox guitar pedal built around C.H.I.P. board. With three modes of programmable operations, infinite applications in a box.
Project where we will develop an overdrive guitar effect with MATLAB and Zynq.
Live bespoke effects manipulation from a Guitar Body using Arduino/Max4Live
