PGEZ Zero is a compact 16 channel GPIO Expander based on the PCA9671, offering up to 64 different I2C addresses.
Use Pushbullet to notify you of whatever your hardware is doing
If you quickly want to exchange messages between 2 or more LoRa-E5 modules, this project will act as a guide to you!
BlogTut for IoT platform Firebase with I2C sensor module and Raspberry Pi.
This example demonstrates how to leverage the power of Azure IoT Hub and Stream Analytics to send realtime alerts based on business rules.
Control your smart car using Win 10 IoT Core by WIFI
Transferring information in a industrial application can be challenging. In this project lets look at how we can do this with a FPGA & RS485
This project will enable you to monitor the water level of any reservoir, and will alarm you when the water level crosses a threshold level.
Want to go hands on with LoRa and don't know what to buy? I think this is the best LoRa Starter Kit on the market right now.
How to apply tinyML approach to detect broken tooth conditions in the gearbox based upon recorded vibration data.
The robot has been developed and programmed by IC 4093 control. Designed to move independently and avoid obstacles. Operating on 3V only.
Arduino-powered Modbus/TCP device server: 8 digital output relay, 8 digital input with photocoupler. It supports both WiFi and Ethernet.
Here we are going to make a counter system using IoT and an IR sensor which is used to count the object/obstacle.
How to send data from a 4zerobox (based on ESP32 and Python programmable using Zerynth) to The Things Network via a Microchip LoRa module
How to run a Python script on an industrial-grade ESP32-based board in 2 minutes with just a few clicks!
SaferWork 4.0 intends to provide real-time environmental data of industrial areas.
Learn how to deploy a powerful and secure open-source MQTT broker on your Raspberry Pi.
This is an example Python program, no wrapper for the AX12 exists.
The Arduino world offers a ton of H/W options and excellent S/W. Making a real industrial project out of it... not so easy.
Bi-Directional DC Motor Control using Windows IoT Core, a DC motor and the L293D IC to automate physical movement in an IoT system.
How to use the RasPiBox Open DIN rail enclosure kit to install your Raspberry Pi based home automation or industry 4.0 project in a cabinet.
This will go over how to use the NoCAN platform by Omzlo and uFire sensors to measure EC, pH and ORP with graphs by the TICK stack.
Using Python to connect an industrial ESP32-based board to an HTTP Request & Response Service to get the current UTC time.
Use Embedis to store and change all your project settings on the fly, from your phone, tablet, or web browser!
