An up to six digit number code that enables you to unlock a secret container.
A simple PCB keyboard that you can easily use for your Arduino project. Fully-customizable code provided!
This is my take on an open source alternative for a Stream Deck (start at $120). FreeTouchDeck will cost you about $20 including shipping!
A 3D-printed programmable wireless/wired controller for your PC, and other electronics devices.
Replaced a bad keypad on the outside of my garage door.
An 8-button mechanical switch macro keypad with RGB lighting!
Instead of using 2-axis joysticks, I decided to use a spare TTP229-BSF capacitive touchpad to control a 4-DoF MeArm robotic arm.
In the prevailing COVID-19 situation, introducing a touch-free User Interface for public machines to avoid community spread of the pandemic.
Ocreeb is a 12 key macro keypad with 2 rotary encoders, custom keycaps and under-glow RGB. The board is running KMK firmware on the Adafruit
MEGA BREAD series #4, the 4 by 4 input keypad.
Time management is key in our everyday lives thus the need to create Arduino Digital Alarm Clock to aid in proper time management.
The "Micro Cl1ck" project is a custom, programmable macro-pad, designed to enhance productivity through customizable shortcuts and controls.
Simblee BLE + Arduino Micro = FUN :-)
How to control and program a 4 servos robotic arm with a 4x4 keypad
Ever wished to make your own calculator? This is how you can!
The System sends a message through Telegram whenever a Motion is detected when the system is Armed.
9-key hot-swappable mechanical macropad powered by Seeed XIAO RP2040
A 6-keys DIY Macropad using XIAO RP2040
This clock shows 3 time zones as well as the date. It utilizes a DS3231 RTC (Real Time Clock) and a LCD Keypad Shield. Using UNO.
A simple memory game using Adafruit Trellis 4x4 backlit keypad.
Safe-deposit box for children made of 12mm cardboard and reinforced with chipboard. 4 digits code required to open and illuminated with LEDs
Summative Project for TEJ3M
In this tutorial I'm going to tell you about how we can interface keypad with 8051 and displaying keypad numbers in 16*2 LCD.
How to use a 65.000 colors 240x240 pixels 1.3" display (and 3 buttons) without messing up the project with breadboard and flying jumpers.
