Discover how to set up and run YOLOv12 on Jetson Nano 4GB for real-time object detection. Efficient, powerful AI at the edge!
In this Visuino project, ensure accurate timekeeping with a dual-source system!
It is a sports training system for athletes, which allows to measure and increase the capacity of reaction time to stimulation, or reflexes.
This project describes how to build a GPS data logger at a lower cost.
The Arduino is simple, cheap and power efficient but has limitations. Sometimes, you may want to have more than one access your I2C bus.
Arduino and Python-based project that will help us read the sensor values and plot it on Python.
This is the first board with Stratify OS support as more ports come for STM32.
Arduino and Python-based project that will help us read the sensor values and plot it on MATLAB.
Chech the accuracy of the ESP32 RTC and show on display and save dates on Webserver
In this tutorial, you will learn how to use RTC DS1307 module with Arduino to make a reminder.
Sharing the location and path with your friends on a map in real time. Take control over your entire hiking group.
Using NTP (Network Time Protocol), is a protocol that is widely used for synchronizing the clocks of computers over a network.
A smart system that measures electrical parameters, uploads the readings to the cloud and logs the measured data to an SD card.
Guide to use esp8266 flash memory and Little File system using using Arduino IDE. This guide covers how to read, write and delete data.
A fun introduction to PubNub with Adafruit's Huzzah Feather. Huzzah! Huzzah! Huzzah!
Learn to add dynamic parameter to Tasks in FreeRTOS with the ESP32 and ESP-IDF
What is FreeRTOS and why is it important?
Get started with creating a basic task in FreeRTOS with the ESP32 and ESP-IDF
Embedded systems development of an Formula SAE Electric Racecar at the University of California, Irvine.
This project aims to make a system that can effectively track celestial bodies (such as planets ) with a fair amount of accuracy.
Digital calendar clock using Arduino Uno, I2C LCD and 1307 RTC module.
Here is code for a modern awesome real time clock (RTC) for MKR IoT Carrier Rev 2. There is a date and time display.
Setting a software delay in your FreeRTOS tasks, that enables other waiting tasks to run.
I made a realtime Arduino clock with a small LCD display.
