This example will show how to format and send data to the serial monitor to display a table of data (HEX, OCT, DEC, and BIN) in one👍
Send a pulse to the arduino uno through by a attiny 85, using software serial communication
3D printed robot arm running on Arduino, contributed and supported by an active community.
Configuring Node-RED for usage with and our RS485 HAT on a Raspberry Pi.
In this tutorial, learn how to send data to TCP server using a SIM900 module.
Serial communication between the Pycom LoPy and the Arduino Uno.
This project will show you how to use RFID with serial monitor.
This project describes the steps to enable UART access on the Wiscore Alexa Board and communicate with an Arduino board directly via serial.
Read and write to multiple Modbus RTU slaves from the cloud through serial communication using WolkAbout IoT Platform.
Write and read data like text and images, which cannot be stored on Arduino due to its large size.
One of the things PocketCHIP can be used for is programming and controlling or processing date from an Arduino. We show you how.
Helps parents know the whereabouts of their children's vehicle and admin of travel agencies know the location of their cabs.
It is controlled by an Arduino Mega 2560 and connected to Raspberry PI via WiFi using ESP8266. It is also able to run independently.
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
In this post, I have used a LDR to sense the black obstacles (cactus )in this game and make the dino jump using a system of Arduino and pyt
Learn about the communication methods between two or more Arduinos using UART or I2C.
USB to TTL - CP2102 USB to Serial/UART with USB Type-C, Micro USB Plug
Ever wanted to get two embedded devices communicate between each other? Perhaps you had an Arduino Uno and wanted to add the WiFi capability
This project shows how to use the Simulink Support Package for Arduino Hardware to run a Simulink model on an Arduino Mega 2560 board.
Use OSCUP in your project to speedup the development of a custom UART communication! It is an entirely customizable protocol
All the Serial functions like Serial println, Serial read, if Serial, Serial available etc.. will be covered in this project
In modern world, it's very difficult to keep check on patients' health. With my project, you just need to ask Alexa for their pulse rate.
UART communication is still one of the most used interface in the embedded world. SNIFFly helps to log up to 4 UART channels.
Attractive GUI designs seem quite possible with Raspberry Pi for automation side.
