Hackster.ioLearning Hardware Community.
×
Leave Feedback
Log inSign up
ProjectsProjectsChannelsChannelsNewsContestsEventsVideos

36 smoke sensor projects

  • Last updated
  • Most popular
  • Most recent
  • Most respected
  • Trending
  • All time
  • Featured
  • Last 7 days
  • Last 30 days
  • Last 12 months
  • Any difficulty
  • Beginner
  • Intermediate
  • Advanced
  • Expert
  • Any type
  • Showcase
  • Protip
  • Tutorial
  • Work in progress

Related:
  • Fire & Pyrotechnics
How to Create a Data Displaying System with a TFT Screen

This project will show you how to make a data displaying system using a TFT screen.

How to Create a Data Displaying System with a TFT Screen

MisterBotBreak
11K

Detect gas, carbon monoxide, motion and water leaks with this multipurpose project.

Gas, Carbon Monoxide, Motion and Water Detection

gusgonnet
4.1K
Smoke and Gas Sensor

In this project, we will use the MQ-02 sensor to detect smoke and gas.

Smoke and Gas Sensor

ELEDTROLED
3.6K
Automatic Fume Extractor

Hack a cheap smoke detector to automatically extract smoke, carbon monoxide and solder fumes!

Automatic Fume Extractor

Tad McAllister
2.4K
Arduino Smoke Detector with MQ-2 Gas/ Smoke sensor

Build a simple DIY Arduino Smoke Detector with MQ-2 Gas/ Smoke sensor

Arduino Smoke Detector with MQ-2 Gas/ Smoke sensor

Rucksikaa Raajkumar
6.9K
Monitor air quality with ZMOD4410 Pi Hat and Raspberry Pi

This Pi HAT sensor measures Total Volatile Organic Compounds (TVOC) and can estimate carbon dioxide (eCO2) levels.

Monitor air quality with ZMOD4410 Pi Hat and Raspberry Pi

Monica Houston
4.4K
Smart Smoke Detector

This smoke detector sends a notification to your phone when smoke has been detected, and you can open the solenoid valve by a SMS.

Smart Smoke Detector

Team Group #6
1.6K
Smoke Level Detector with Alarm

The level of Smoke in our Surrounding because of combustion. So, We can sense the amount of smoke and generate an alert signal.

Smoke Level Detector with Alarm

Mayank Mohan
15K
How to Use a Gas Sensor (MQ-2)

This project will show you how to use an MQ-2 gas sensor.

How to Use a Gas Sensor (MQ-2)

MisterBotBreak
13K
Blynk Smart Smoke Detector | MQ-2 Gas Sensor

This is a smart smoke detector that uses an MQ-2 gas sensor for detecting the smoke.

Blynk Smart Smoke Detector | MQ-2 Gas Sensor

Techatronic
3.9K
Smart Smokes

Alexa-enabled smoke, flame alarm with emergency lighting.

Smart Smokes

oleolsonfablab
3.3K
MQ-2 Gas Sensor : A friendly introduction

A short and simple introduction about the MQ-2 Gas/ Smoke sensor module.

MQ-2 Gas Sensor : A friendly introduction

Rucksikaa Raajkumar
3.1K
Smoke and Gas Detection Using MQ-2 sensor and Piezo Buzzer

This sensor is used to monitor gas leakage in your home or work place, and it beeps the buzzer whenever leakage is detected.

Smoke and Gas Detection Using MQ-2 sensor and Piezo Buzzer

Surilli
2.9K
Smoke Detection System ESP-8266

A device that will detect smoke, fire and beep the buzzer also it will be uploading the data to website. Using GRANDEUR !

Smoke Detection System ESP-8266

Grandeur Technologies
&
WEIRDO CREATIONS
2.4K
Home-made Nest Protect with Linino

Prevent fires with a connected smoke alarm

Home-made Nest Protect with Linino

Giando
2.1K
Smoke 'Detector'

A simple smoke "detector" using Arduino and a Carbon Monoxide sensor.

Smoke 'Detector'

Daryl Lukas
2.1K
Smoke/Gas Leakage Indicator or Alarm

Combustible gas/smoke leakage detector using Arduino.

Smoke/Gas Leakage Indicator or Alarm

Smit Babariya
1.4K
Smoke Detection Sensor using Bolt IoT

Save yourself from fire with home made fire security system using Bolt IoT!!!

Smoke Detection Sensor using Bolt IoT

Kartik Desai
1.3K
Urban/Suburban Air Quality and Fire Detection

Air quality and smoke(fire) detection for urban canyons to provide early detection of brush fires caused by transients or other causes.

Urban/Suburban Air Quality and Fire Detection

Team Parley Labs
1.1K
Smoke Detector with Arduino

You'll learn how to create a Smoke Detector with Arduino and download your own 3D Enclosure.

Smoke Detector with Arduino

JLCPCB
&
Robotics Arduino
1.1K
Smoke Measuring Station

Monitor real-time smoke/PM levels in your area with a Raspberry Pi

Smoke Measuring Station

Tomasz Lewicki
944
Smoke Detector

In this project, smoke is detected using MQ-2 sensor and alarm will be on according to it.

Smoke Detector

Ayush Kumar
838
Integration of Surilli Basic M0 with MQ2 Sensor and 16x2 LCD

Visualize the changing analog values of the MQ2 Smoke Sensor on 16x2 LCD using your Surilli Basic M0.

Integration of Surilli Basic M0 with MQ2 Sensor and 16x2 LCD

Surilli
704
Smoke and Gas Detection Using Surilli GSM

This sensor is used to monitor gas leakage in your home or workplace, and beeps the buzzer whenever a leak is detected.

Smoke and Gas Detection Using Surilli GSM

Surilli
681
  • ← Previous
  • 1
  • 2
  • Next →
  • About Us

  • Hackster Overview
  • Hackster for Business
  • Hackster PRO
  • Help Articles
  • Brand Resources
  • Sitemap
  • Legal Thingies

  • Terms of Service
  • Contest Rules
  • Code of Conduct
  • Privacy Policy
  • Privacy Policy for California Residents
  • Cookie Policy
  • Find Us On Social

  • Facebook
  • Instagram
  • LinkedIn
  • X
  • YouTube
  • Visit Our Avnet Family

  • Avnet
  • Premier Farnell
  • element14
  • Newark

Hackster.io, an Avnet Community © 2025