Ultrasonic distance sensors are designed to measure distance between the source and target using ultrasonic waves.
This project will teach you guys from basics to build an ultrasonic radar sensor system at home using Arduino IDE and Processing IDE.
Hacking two cheap HC-SR04 ultrasonic distance sensors and a launchpad to create a spread spectrum phased array Sonar.
This project builds on the open-source 3d printed modular educational robot with Adafruit Crickit, Circuit Playground Express obstacle avoid
Part one of a project that will demonstrate the building of an FPGA/SoC-based hexapod robot.
Matlab can be used to process and display data from a microcontroller. This is a really simple example on how to do that.
I attempt to map the shape of my room using four HC-SR04 Ultrasonic distance sensors and a magnetic compass to measure the heading.
A Smart Sonar System which alerts the user when it spots objects or enemies within range.
Put 2 smart sticks in the ground and get your position relative to these sticks with cm accuracy. Uses audible sonar.
In this project, you can build and display a sonar system by using graphical programming software Kittenblock, developed based on Scratch3.0
A simple device to measure the distance to the nearest object. We have made it fun by adding sound and lights if the object is too close.
Build your sonar at home!
Receptionist drone, have a flying assistant show you the way to the lobby. Powered by Sony Spresense.
Olimex Pinguino Micro board & hc-sr04 ultrasonic sensor with output to CDC.
Use a Raspberry Pi to link a sonar range finder with a kids xylophone. Different notes are triggered at different ranges.
This device is better than the similar devices made with an Arduino microcontroller board thanks to the stronger microprocessor and the well
This robot utilizes a sonar sensor in order to gather data on its surroundings and uses that received data to navigate the area around it!
A game where you race to accurately shift gears and control the clutch, gas, and brake to reach top speed in the quickest time!
In this tutorial we will learn about how to make a automatic sanitizer with additional features using Magicbit
This project will show how to create obstacle avoidance on the Lily∞Bot with Raspberry PI Pico W using MicroPython, 2 motors and a sonar.
This is a distance calculator(range 30cm), made with arduino, ultrasonic sensor and oled display... It is a beginner level project....
Prove to the world that you're a good driver by showing your "Infraction Score, " generated by using argons and sensors.
This project describes how to use a sonar to illuminate or modify blink rate or brightness of an LED programmed in MIcroPython