Map FPGA UARTLite IP to Linux via PCIe XDMA. TTY interface and direct Python mmap access. Perfect for SDR and embedded applications!
A tutorial on creating an UART interface between the Basys 3 board and the computer terminal in VHDL running on FPGA.
Running FreeRTOS kernel on STM32F103C8T6 aka "Blue Pill" with the help of Keil uVision IDE from ARM Keil.
Send data from Arduino Uno board to ESP32 serially using UART Communication protocol.
See how to bring up Xilinx's soft-processor implementation, the MicroBlaze, on the Arty-A7 board.
Display an output on the LED bar graph based on the serial command received from the host.
An arduiNOOB-friendly tutorial...
Learn about the communication methods between two or more Arduinos using UART or I2C.
A very simple interface for debugging or operating an embedded system can be easily configured with UART. Works great for data acquisition.
USB to TTL - CP2102 USB to Serial/UART with USB Type-C, Micro USB Plug
Interfacing a proteus simulation with NodeMCU
Use OSCUP in your project to speedup the development of a custom UART communication! It is an entirely customizable protocol
We design a flexible, remote-controlled test system for polar codes in FPGA.
The BeagleBone will be controlled through the network and use a serial terminal to communicate with off-board devices such as MCU boards.
This project is what I did in my free time last year. I hope that it can give you a demonstration of the applications of the STM32 Board.
Adopt replicable and low-cost design scheme of spectrum chip, simplify the realization complexity of spectrum detection and analysis.
The project shows how to design using the same USB to enumerate as two COM PORT Terminal.
Smart watch is a simple system that is used a hardware platform called Arduino, which is intended for artists, designers, and hobbyist.
A bootloader with an interactive console and secure boot feature for the Tiva TM4C123G series microcontroller.
Cheap USB to UART (RS232/Serial) Converter Using Microchip MCP2200
Real Time Digital signal processing: UART Controlled Arduino UNO signal generator
Use the camera and Vitis-AI platform to make a robot dog that can recognize people and cats.
PSoC4 BLE receives OTA data and is sent to FM4 over UART and then to PC over Ethernet. FM4 also sends Ethernet data and is converted to BLE.
How to Place Calls from A9G Board by Sending AT Commands from Raspberry Pi Pico W
