I've always wondered if there were any real differences between temperature and humidity sensors, especially DHT11 and DHT22.
This project monitors temperature and humidity via web.
Sending IoT Long Range Wireless Temperature and Humidity Sensor Data to a Google Sheet.
The goal of this tutorial is to enable you to capture and send data to cloud from your Raspberry Pi.
The comfort level was symbolized by blinking 5 different colored LED using HUMIDEX (a combined parameter of temperature and humidity).
Generate and Sell verifiable IoT data with blockchain!
Use a 1.8-inch TFT display to monitor surrounding humidity and temperature with a Zynq FPGA.
Portable Air Quality Monitoring Station Based on ESP8266 - AiryFi #Arduino @Arduino
By knowing some parameters, we are able to predict the weather up to some extent.
Carrier/dev/breakout board for the NodeMCU, complete with deep-sleep, onboard DHT, level shifter, external sensor/servo header and V select.
Averaging temperatures over 60 seconds smooths some of the sensor limitations, allowing for a smoother graphic.
Have you ever wanted to track your Grilled Cheese sandwich? This solves all of your problems!
Botanic lab monitor: temperature, humidity, plant canopy.
I made a lot-based plant monitoring device. From this device, you can measure the condition of your plant from anywhere in the world.
Let's use the LED Matrix of the most recent iteration of the Arduino Uno - the R4 Wifi - to plot the current temperature read from an SHT40
Use this project to get started on your first Pynq design using the Pmod Hygro to monitor the temperature and humidity of your environment!
If our pollution adversely affects the environment, then, it's our responsibility to protect the environment, humans, plants, and animals.
Temperature, humidity and CO2 level inside a face mask were checked before and after 30min of being inside an appartment and outside.
Monitor your wood stove all winter to make sure it stays in the goldilocks range so that you prevent overtiring and the fire from going out.
Tweeting Dehumidifier project using Sparkfun ESP8266 Thing and thingspeak.com
Sending-data-of-IoT-Wireless-Temperature-and-Humidity-Sensor-to-MySQL.
This tutorial shows how to monitor temperature and humidity from Magicbit (ESP32) and view it in the Blynk cloud dashboard.
The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. This article will show how to display on QIoT.
In this project, we are sending data of DHT11 which is humidity and temperature to phpmyadmin database using python
