Bubba is a 3D printed quadrupedal spider robot. It has 8 degrees of freedom and can operate both autonomously and programmatically.
Clothes dryers waste heat by venting it to the outside world. Reclaim that heat after the humidity of the air has dropped to safe levels.
Robotics, Arduino, EasyDriver, Stepper Motor, Servo Motor, Etc...
Create your own safe out of very simple tools : a servo, a potentiometer and a Tokymaker.
The flag moves when #keyword is tweeted. Integration of Twitter and obniz is easy to do. Move the flag when you've got a tweet.
Manually or automatically sweep the arm of a servo through a specified range while showing average operating current of that servo
A 3D printed pan and tilt assembly for your MG90S servos.
Control the position of a microphone stand remotely through Blynk.
What's better than a robot car you can drive? What about one that picks up small objects and assists a bad driver.
Control servo motors (up-to 8) using XinaBox xChip OC05 – Servo Driver (PCA9685 PWM Controller & BU33SD5 Regulator) and xChip CW02 (ESP32).
To make a normal 180 degree servo to turn in 360 degree.
Build your own door lock, automatic trash can, or control a robotic arm using micro servo SG90 and Surilli Basic M0.
Make ESP8266 control 2 Servo make pattern drum for accompained The takbiran for join celebration welcome 1 syawal hijriah.
Introduction to the parameters and use of three types of pneumatic end-effectors.
It was the first day of our project, "Fishing Cat", and we tested the servo motor and the switch.
A remote controlled LED using the Arduino Uno.
It was the second day of our project. We tested if the servo motor operates or not when the switch is pressed.
Robo HAT MM1 by Robotics Masters An open source robotics and automation controller for Raspberry Pi... I was very much interested
Connecting potentiometer and servo motor.
Robotics, Arduino, EasyDriver, Stepper Motor, Servo Motor, Laser Diode, 5-Way Tactile Switch, Etc...
In this guide we learn how to let others remotely control and view a servo motor through a game on Surrogate.tv
In this tutorial we learn about how to make a Smart dustbin using Magicbit with Arduino
Using Pluto X, LED and a servo, I built a lamp with actual visual characteristics of a flame!
The OC05 xChip is a servo motor controller driver that uses the PCA9685 PWM controller as servo interface supported by a BU33SD5 regulator.
