This project takes you through all the steps required to get your RAK831 LoRa Gateway module up and running with WiFi as the backhaul.
View images and RGB video play on SPI TFT display using Arduino Nano.
This is a Noname graphical LCD display salvaged from an unknown device. We are going to figure out its pinout and try to interface it.
SPI Interface code for Pmod ALS (8-bit ADC) in Verilog is implemented from scratch,and transmitted to 7-seg display on Basys3 FPGA board.
A Texas Instruments MSP430 designed to input driver data using ADC, handle logical faults, and output via CAN-Bus using SPI.
This project will play sound from Arduino and work the same as Google Assistant with limited commands. voice-controlled automation.
Attach 2 SD cards to Arduino and access both of them.
Program a small Arduino Using A bigger Arduino to Display a Scrolling Text Without a Library.
LED Cube running on Arduino Nano and flip-flops.
I need to make ESP8266 work with Adafruit OLED for my project I will update my progress as I accomplish things.
Are you tired of looking at spinning hands or plain numbers? This clock gives you the time in English!
A hardware tour of various Linux driver subsystems.
This project is what I did in my free time last year. I hope that it can give you a demonstration of the applications of the STM32 Board.
Learn how to interface the MCP3008 8-channel 10-bit ADC with an STM32 microcontroller using the SPI serial interface
Follow these instructions to learn the different modes of SPI communication on an STM32 microcontroller with simulation in proteus
This step-by-step tutorial describes how to use a TFT SPI display on the AMD Xilinx Zynq-7000 SoC platform.
A 3D-printed hand-movement controlled Thanos Infinity Gauntlet which does not need superpowers to 'balance the universe. 😏
How to communicate between 2 Arduino UNOs through SPI communication protocol to exchange data or control other Arduino using one.
How to modify Adafruit's CircuitPython packages to install them on the ZynqberryZero with a Linux image created in PetaLinux 2022.1
SPI is well-known for its speed but still people use polling instead of interrupts.
This project adds a 5" resistive touchscreen display to the Raspberry-Pi through the SPI bus.
Wake up gently to a gradual simulated sunrise and the perfect alarm music sound!
