Alerts you if the temperature of the cooler exceeds its thresholds or if the cooler door is opened!!
A simulation is supplied in Qspice for an ON/OFF temperature control with a Vishay NTC thermistor, including a small VERILOG module
Measure the temperature of wine using a sensor and displays it on an LED.
I have designed a system with BOLT IOT device which will notify Cold Storage owners in case of any impairment found inside Storage.
An IoT based system that will send a SMS and buzzer alert upon temperature increase in the engine.
Simplest of the simple. Uses an Arduino UNO, but could be used with other boards.
Be lazy with this full complete monitoring system which allows you to check activities in various rooms while you're not there.
Device which will alert in temperature change or any anomaly that happened. It also predict the future data on basis of data history.
This Valentine's day, feel the warmth!
In this section, we will build a simple project using Arduino that reads the temperature and humidity and displays the results on the serial
This following project warns you with a sound if the temperature reading passes the threshold value set by you.
Measure the temperature and the humidity in the room with a simple project!
The Stove Safety Monitory System monitors the temperature and motion around the stove with real-life data to maintain home safety.
When life makes you step away from the kitchen, this system offers temperature and gas/smoke monitoring and warnings!
The drink monitor is designed to watch your drink for tampering when you step away with a variety of sensors.
Get temperature and humidity readings, which will be used in an automated stand.
An LT spice simulation of a simple heating cooling circuit with modeling of the thermal aspects.
SHIELD is a device that can detect and alert people with mobile disabilities of potentially dangerous situations.
This Project helps you to monitor your factory temperature and to maintain it in a specific range of temperature.
The next battle we have to face as human is the food shortage. This has been already happened to some countries at alarming rates.
The Digitally Controlled Electric Load is an electronic load device that is controlled by the ESP32-S3 microcontroller using PID control.
In this blog, we'll delve into the working and construction of an automatic fan controller that utilizes the UA741 IC.
The dash sensor reads light, temperature, and acceleration, these readings will lead to a better understanding of the user's surroundings.
An LTspice XVII simulation of battery temperature protection with adjustable low and high threshold, with LTC4079 and NTC
