This is a basic security system by using Arduino and Ultrasonic Sensor.
Automatic Parking System is an easy project. Information given below demonstrates how to code, connect the various components of the system.
Measuring Distance using Ultrasonic Sensor With NI LabVIEW MyRIO FPGA.
Here is my latest crazy project, ULTRASONIC LEVITATION, it is a very simple project but at the same time interesting and amazing.
Use I2C communication to connect 2 Arduino boards and implement I2C Ultrasonic Ranger with Visuino.
Simple setup of a Seeed Studio Grove ultrasonic sensor (not HC-SR04) in Arduino.
This uses AMG8833 and HC-SR04 to measure temperature and give an output to Alexa, AWS DynamoDB, 1.44" TFT and LCD with a NodeMcu.
This is an IoT project which is an alarm system which you cannot snooze or turn off. It senses that if you are present on the bed, it beeps.
This project is about how to use the ultrasonic sensor HC-SR04 with Arduino Uno to make distance measurements just like in cars
Use an ultrasonic module HC-SR04 distance measuring ranging sensor on your BeagleBone Blue.
Try turning on an LED using an ultrasonic sensor.
This project uses an ultrasonic sensor to indicate the distance of any object from it.
An Ultrasonic Range Finder Using an SRF05 and an ATTiny85
Calculate distance to a certain object using an ultrasonic sensor. It can be used for car distance alerts, security systems etc.
This project help us to get our life easier. It will detect many things and show the alert on our device which can controlled by Bluetooth
Make a car parking assistant of your own. It warns you when you are too close to any object.
It will calculate the distance of the object detected in the serial monitor.
Radio link two micro:bits and a 'sonar' ultrasonic distance sensor. Detect movement with one and immediately show an alert on the other.
In this tutorial we will learn how to Use a LED ring with and a Ultrasonic module to measure the distance. Watch a demonstration video.
Large shops used staff to limit customer entry during lockdown. Small shops which don't have extra staff, can use this solution.
This is an automatic soap dispenser project that we made using Arduino and servo motors.
Raspberry Pi Pico measures distance with HC-SR04 and displays on a 0.96 OLED. Measuring can be toggled by a button (interrupt request).
Controlling LEGO Mindstorms NXT motors and sensors from a myRIO using LabVIEW to create a robot base.
An ultrasonic sensor is used to detect the distance of a detected obstacle, and it imitates a bat's echolocation.
