Access control using Arduino, RFID and electric strike.
An access control system for doors or equipment that checks RFID tags against a list of approved users.
This project is to develop an RFID based access control gate for an office. Visitors having a valid access card will be granted access only.
A cheap solution to keep them away from your secret room.
In this tutorial, you'll learn what RFID is, how it works, and how to make an Arduino-based door access control system with counter.
A project to prevent access of suspect Covid-19 positive in office or community. M5Stack Core Grey, RFID unit and NCIR body temp measure
Keyword Spotting Using OpenAI Whisper and Edge Impulse, and deployment to Seeed Studio XIAO ESP32S3 (Sense)
A device that can revoke/allow access to some arbitrary machine (3D printer or lasercutter) by interfacing with its on/off switch.
When you knock on the door or close to the door, the door will open automatically.
How to connect a fingerprint sensor to an Arduino or NodeMCU, then store and read fingerprints.
Turn your RPi into a full featured camera with remote access, end2end encryption, and easy user enrollment.
Integrate a Weigand-26 RFID reader with an IOT2020 for cloud-based door access control and monitoring using Node-Red.
How to show JPG pictures by an IP cam on an ESP32 with ILI9341 TFT display.
Access control proof of concept using Ruby on Rails with ESP32 and RFID
Next generation commercial access control for the IoT era.
Very simple way to connect cheap RFID Wiegand reader and WiFi relay board to make pretty safe and simple access control system.
You'll learn how to create your own parking access control system with Arduino.
This is very basic door security system which is using an eletromagnetic lock
Looking to open home to airBnB? Grovey sLocks is an Internet connected BLE enabled device allowing users entry, once approved via the cloud.
This simple project demonstrates all main techniques that are important to building access control solutions with LTPS.
You'll learn how to construct a human machine interface to communicate information with users of a subway system.
This article uses touch screen to send commands to the MCU to control the relay and MFRC522 module.
Mobile phone allows the door to be opened automatically. Multi-block sites provide security and speed at the main entrances.
Door access control By Qr code reader by e-paper (No battery)
