Building a Ubuntu LTS configuration for the UDOO Quad
This tutorial walks through an application that reads/writes data to DDR memory from the Linux userspace on the Zynq-based Arty Z7 FPGA.
Let's develop step by step a project for controlling and programming a robotic arm, simulating the basic functions of an industrial robot.
Not all imaging systems need to be expensive. Solutions can be created using cost optimized FPGA and CMOS image sensors directly.
Bring up a base hardware design in Vivado and Vitis on the Eclypse Z7 with PMOD and ZMOD support.
Experiences and benchmarks with SATA drives on the UDOO.
solid plastic servo operated robot gripper.
See how to generate a custom embedded Linux image for the Arty Z7 using PetaLinux 2020.2.
Using TFT LCD Display 2.8" with STM32 through SPI communication.
Using the Arm DesignStart FPGA Cortex-M3 to control a simple wheeled robot. Also known as getting started with DesignStart FPGA & Cortex-M3.
Take full advantage of Xilinx's Zynq FPGA chip by running both of its dual ARM cores simultaneously.
1000 of K82 Freedom Boards are collecting dust because of the hobbyist unfriendly IDE; pump up the duds with easy Arduino-like functions.
Portable, Bluetooth, voice-controlled claw device for drone! Easy to build, cheap, and made out of recycled materials!
A low-cost DIY programming adapter.
Build you own Robot arm to grab objects with just 3 servos and one Arduino UNO!
A breadboard-friendly STM32F0 development board with added USB2Serial, RGB LED, 7ch hi-sink driver and a simple one-button boot mode.
A simple display driver for 7 Segment LED displays of any arbitary number of digits, controlled directly using GPIOs. programmed in Ada.
ESP32 microprocessor, L293D H-bridge for controlling 4 servos SG90 and 4 motors controlled via a Html webpage using WebSocket.
IBDAP's objective is to become an affordable open source & open hardware CMSIS-DAP JTAG/SWD debug probe implemented using gcc & makefile.
The ARA (Arduino Robotic Arm) is an initial project, a first phase, of one of the most popular project carried out by the Arduino community.
Enable the digital I/O available on the Arduino shield header of the MiniZed.
Facilitation of quick and efficient cough-based pre-screening for COVID-19 suspects.
Learn the complexity of ARM microcontrollers using portable and low cost hardware.
This is a step by step guide on how get a basic project working for the STM32L476RG using open source command line tools on Linux.
