As a paragliding pilot I have built my own instrument that plays bip-bip during climb, and plays beep when sink down: with battery + solar!
A simple PSU made with breakout boards and having a cool graphical display
Another simple to build useful instrument in you lab.
Musical instrument for multiple users – with Arduino, nRF24L01, MPR121 and MPU-6050 connected to Pure Data Vanilla.
Module tutorial, signal visualisation and a simple code to measure not only sinewave signals but all types, like TRMS Ammeter. + LCD/OLED.
Listen to your inner body energy and vibrations. Project describes how to make electronic instrument that converts hand waves into music.
ACS712 current sensor by Allegro is an Hall effect-based linear current sensor.
This Project will show you how to Burn Hex File For Atmel Microcontroller using Arduino Uno.
Tutorial for creating simple MIDI controller and usage of it in Ableton Live ( or any other DAW)
The maximum signal frequency that the oscilloscope can display is 20 kHz, and the maximum input voltage is 5 V without a voltage divider.
The original hack from the Windows IoT Maker Team, which debuted at the 2014 //build conference.
The device is sufficiently accurate and uses minimum number of external components.
This device serves for accurate measurement of small resistances in the range of 0.1 ohm up to 50 ohms.
3-channel voltmeter with the ability to measure both negative & positive voltages on the same circuit or 3 different circuits simultaneously
Simple and inexpensive way to make such an instrument, with which we can measure resistances with a resolution of 1 milliohm.
Every now and then, we find some cool stuff that we just absolutely have to try for ourselves.
Interested in making a tiny insrument? This tutorial shows you how to build a tiny ukulele!
Uno-based battery-powered PM10 / PM2.5 analyzer with bright large digits on an OLED display.
What do you get when you put together some wind chimes, a bunch of solenoids, a myRIO and a block of dry ice? Some very cool music!
A Bluetooth Low Energy / Web Bluetooth tool to measure the energy needs of your embedded projects!
This is the stand-alone capacitance meter that you can make using only two electronic components.
Measure and record mains frequency on the SD card along with the timestamp.
This device can also be called an EMF meter, as it can measure the relative strength of a field using a scale of 10 LEDs.
A reed organ capable of playing midi files
