A small hand held computer with decent battery life and input power management.
This is the customized LCD1602 shield for both Arduino MKR and UNO boards.
A 49-Key Keyboard named the JeSus 49 running on the Arduino Micro supporting multiple layers.
This is an Arduino base, preset keyboard emulation (HID-human interface device), with SD card file reader and AES 128 encryption.
A minimalist 18 key numpad using the Seeed Studio XIAO RP2040, a single analogue pin, and room for expansion!
FeatherQuill is a dedicated word processor that features a mechanical keyboard and 34+ hours of battery life. Built on Raspberry Pi.
Purple Owl is a 60% hotswap mechanical keyboard with underglow RGB powered by a tiny Seeed XIAO RP2040 and KMK Firmware.
Reliable key press responses can be achieved using programmable capacitive touch sensors.
Our project is an all-analog keyboard synthesizer like the ones popular in the 1970s.
A variation of the keyboard controlled model train, controlled by a PS/2 keyboard.
I saw a gif of this keyboard a couple of weeks ago on Reddit so decided to buy one and modify it to work on my PC instead of a pocket PC.
9-key hot-swappable mechanical macropad powered by Seeed XIAO RP2040
Tutorial on making a continuous touch keyboard that can play any frequency between the specified range.
This keyboard made by m. ki. This Keyboard run by Seeed XIAO RP 2040.
Use top octave generator and TTL dividers to produce full set of temporal notes for DIY music keyboards.
This is a project that uses Atom Matrix to customize shortcut keys, which is convenient for users to set key combinations
Macro keyboard based on ATmega328P.
xobdox is a compact hot-swappable low profile split wireless keyboard with side buttons, encoders and configurable battery options
A Diy Wireless Custom Mechanical
You need to read this project if you want to share secret news or secret message to your friend. 🤣
Shortcut Keyboard powered by Seeed Studio XIAO RP2040 featuring 4 mechanical switches and a 1.47 inch LCD Display.
This is a tutorial about how to use the reader module--RDM6300 to make a serial keyboard for easily identification.
This project is a simple tone keyboard.
This is a 20-key ergonomic keyboard that uses a seeduino xiao-ble powered by ZMK.
