Automated Home using Raspberry Pi 2 (Windows 10 IoT Core) and Arduino.
Simple device to control and initialize DALI lamps.
Use Arduino to run a spectacular Christmas light show. (Both in English and Spanish, en Ingles y Español.)
A Home Automation system using a Raspberry Pi 2 and Windows 10 IoT Core including an App.
The good old buzz wire game, this time with score counter (as well as indicator lights).
Using a Raspberry Pi and 7" touchscreen with nymea:core and nymea:app to build a smart home system with touch control panel.
Create an awesome looking motion activated RGB lights for any staircase under $20!
Now, you can control your light system in your home using your voice , by talking to your systems which to turn on and which to turn off
How did I stand out at prom? In a light up dress of course!
Create a simple home automation system using Arduino and an Android phone.
There are many charge controllers available, but ordinary cheap ones are not efficient enough to use with maximum power from solar panels.
Here We are going to make a light cube which will change color accordingly with surrounding sounds. This work is featured in Hackspace mag
The communication between the cell phone and the Arduino BT board is wireless. Additional devices can be connected into the system.
If there will be no traffic on the other signal, one shouldn’t wait for that signal. System will skip that signal and will move on next one.
This project is using my MusicWithoutDelay library to play multiple sounds at the same time.
Signal your colleagues if you're busy or not by flying a small traffic light around showing red, yellow or green status.
Frustrated with the prices for high quality grow light systems? Let's design a fully controllable, easy to adjust, open-source LED panel.
Using an ASL shield, get up to 24 stairs setup availability, fade out effect, PWM modulation, wireless connectivity and more.
I built this voice enabled home elf to help me keep my house - and power consumption - under control.
Use a 120VAC Pilot Light and a photoresistor to create a simple inexpensive AC voltage sensor based on opto-isolation.
A short and simpel project for visiualize Audio signals with LEDs.
An Android Things-powered clock that allows the user to actually READ the time! Control it via Nearby API or through voice commands.
This project emulates a Philips Hue Bridge that is able to control multiple types of lights.
Dynamic pattern tote bag for a modern dynamic lifestyle.
