In this Simple Tutorial we will learn how to make a PWM using Arduino and observe the Signal on the Oscilloscope.
See how to get up and running with the new ADP3450 USB Oscilloscope to fulfill your bench top test equipment needs.
How to measure differential signals using an oscilloscope [examining the ADSL2+].
In this tutorial we will learn how to make a Pulse Generator with a Frequency Sweep using DDS Frequency Signal Generator AD9850.
A tiny function generator built using the ATtiny1614 microprocessor and its internal Digital-To-Analog Convertor (DAC).
Learn how to build your own lab power supply, decade box, function generator and oscilloscope.
In this guide, I will show how to measure harmonics in signal with Analog Discovery 2 using FFT contained in Digilent WaveForms.
This new tool turns your device into a sophisticated oscilloscope!
Resurrecting Tennis for Two, a video game from 1958. This is arguably the first documented video game.
Design and develop a simple soundcard oscilloscope under 1$
Calibrate the Analog Discovery 2 so you can ensure you are making the most accurate measurements possible.
This exercise will show you how to use your Analog Discovery 2 to verify what the signal looks like from an Arduino PWM pin in LabVIEW.
Cheap and easy-to-build VFO device that is almost indispensable in radio engineering, especially in DIY radio receivers.
I got to test out the new Analog Discovery 3 and it saved me from a bad connector on a SPI bus between an FPGA and an eInk display.
Build a small portable electronics lab with an Analog Discovery and an Orange Pi PC Plus
Measure and Analyse Voltages on the Go with nRF5340
It's a handy little gadget that draws charts automatically using signals you feed into it from the probes hooked up to an electronic circuit
I2C Signal Decoding/Debugging using Siglent SDS2102X Plus and SDS1104X-E Oscilloscopes
This exercise will show you how to use your OpenScope MZ to read the output of a first order RC circuit.
How to improve on the stripboard oscilloscope we built in the last article.
See how to script a series of test measurements for automated testing on the ADP3450.
In this project, we will make a single trace oscilloscope using the gen4-uLCD-43DCT-CLB display module.
Simple to build, inexpensive instrument with a beautiful graphical interface, primarily intended for educational purposes.
This project walks through how to design analog filters with RC circuits and measure their frequency response in WaveForms.