Take advantage of the Zynqberry by taking the first step of porting your Raspberry Pi projects over to the Zynq platform.
This project walks through how to generate an embedded Linux image with the Yocto-based PetaLinux tools from Xilinx for the ZynqberryZero.
Article about Intel platform for programming Edison, Galileo.
We have developed and test the DPU TRD for ZCU104. This TRD have used the DPU IP version 3.0, the design have 1 core DPU & softmax function.
HACK The PlayStation 4 Camera Into a Cheap Yet Powerful 3D Depth Camera with Stereo Vision for Python OpenCV and Linux
This project walks through how to create a base Linux image for the TE0802 Zynq UltraScale+ MPSoC development board.
Hello... did you ever want to set up a gaussian distribution on your BeagleBoard. org family of boards, e.g. the BBAI?
Review and Quick Start Guide for Lenovo Leez P710 Development Board.
This project demonstrates how to get started with a successful Yocto build for the i. MX 8M Quad EVK
This project walks through how to install an emulation of x86 Ubuntu in a VM on an M2 Mac and install Vivado, Vitis, & PetaLinux 2023.2.
Create a custom AXI Core with AXI Streams
A hardware tour of various Linux driver subsystems.
Users are able to wireless check-in at an event and have their name tag label automatically printed!
A series about creating a custom AXI IP cores. In part 1 we will create a core, an FPGA image around that core and then interact with it.
Cross-compiling Rust to NL668-LA board using OpenLinux. Prepare your environment, create, compile and run your first aplication.
This project walks through how to deploy RTL designs in the programmable logic running independent of the Linux userspace on the KR260.
Start converging between microcontroller dev boards and FPGA dev boards by running Adafruit's CircuitPython on the Zynqberry for the PiOLED.
Learn how to configure a Docker container, configure the environment, build a Linux SDK using Yocto Project, and deploy to hardware
Using Vitis for FPGA acceleration, this second part covers how to add the accelerated kernel to the embedded Linux image in PetaLinux.
Looking to access your Raspberry Pi or Jetson nano remotely? This guide will help you access VNC & SSH over network in 2 minutes!
Add buttons and an LCD for an easy to create retrogaming platform. This is the add-on PocketCape and configuration software.
Did you want linuxCNC to work and make it work w/ the BBG? You came to the right place!
This project outlines the latest updates to the Kria KV260 PetaLinux project when using the 2021.2 BSP since 2021.2 was originally released.
This project demonstrates how to drive an N20 micro-gear motor with encoder using a Digilent HB3 motor controller PMOD with the Kria KR260.
