We have created a car controlled by claps with Arduino. It also stops when it impacts with something.
Hey! This project shows how to make a door lock system, using Arduino, RFID Module, OLED Display and Stepper Motor.
Make your own H-Bridge motor driver with just a few components at home
ISSOT keeps track of the International Space Station and gives you a visual indication of its location; even if you can’t see it.
Two stepper motors and an Arduino to turn around an SMD part.
In this tutorial we will learn how to make a simple step counter. This project is very useful in robotics.
A device that automatically dispenses cereal when a face is recognized on a Raspberry Pi camera running OpenCV.
BeagleBone Blue's DC motor drivers can be used to drive bipolar stepper motors too! Pair them up with a little code for open loop control.
This is an entirely 3D-printed laser scanning microscope using an optical pickup I salvaged from a defective Blu-ray player.
Learn to work with stepper motors online! You can use the Wokwi Embedded systems simulator to simulate several boards online and learn! 😍
Use an EtherCAT master to communicate with an EtherCAT Arduino Shield by Esmacat(EASE) on an Arduino to control motors using a motor shield.
My Tachometer failed so I replaced the original mechanism with a stepper motor, driver board and Arduino pro micro
A Baby stuck to a "Baby 8 Step Sequencer" built into a child's workbench toy, fit with LED's, Switches and Pots galore.
Raspberry Pi Camera V2.1 and Pi HQ Camera motorized holder, Laser pointer
In this very simple project, you will connect up a stepper motor and then get the Arduino to control it in different directions and at diffe
Are you thinking about make an Android app for arm robot with BLE? With this project you can understand how to work BLE and control it.
Use a RaspberryPi master to communicate with 2 EtherCAT Arduino Shield by Esmacat(EASE) on Arduino to control motors using LCD shield input.
In this tutorial we will learn how to use encoder to control the speed and direction of the stepper motor Nema 17 using arduino.
When sensor detects movement the stepper motor activates. Can be reversed by removing the ! in if cycle.
In this tutorial we will learn how to rotate a stepper motor for a certain time period and then with a push of a button repeat it again.
Just a simple, fun Candy Dispenser using Arduino, a 3D Printer, and tape.
In this tutorial we will learn how to move a stepper motor NEMA17 for a certain amount of steps, and then with a push of a button repeat it.
In this tutorial we will learn how to move a stepper motor, change the speed with the potentiometer and change the direction using a button.
A 3D printed clock driven by a single stepper motor using gears to separate hours, minutes and seconds.
