A slightly more intermediate project involving a unique pH sensor and an Arduino which is used to measure the pH level of solutions.
Sometimes when I take a bath, the water stops. I checked, the water tank is empty and I have to call the water engineer to fix the water.
How to use a GY86 (wave measurements) and water temperature sensor.
Use Bare Conductive Electric Paint, an Arduino, and the anduinoWiFi shield to make a system that sends a text when a leak is detected!
NodeMCU interfaced with humidity sensor gets the analog input as moisture and post the moisture value to the cloud.
Never forget to water your plants again with this extraordinarily annoying soil moisture monitor.
You want the perfect environment for your plants to grow? Here is the solution!
The Smart plant allows you to automate the watering of your plant with the particle Argon while measuring room and soil conditions
A smart IoT-based water management system designed for water usage databasing and management using remotely controlled water sensors.
In this project we will learn on making water level indicator using linkit one. This project could help you save water more efficiently.
Raspberry Pi based tools on board utility vehicles to live stream drive-by meter readings and GPS locations to Google Cloud.
Tasty thirsty-safety firsty-a touch-less water dispenser.
Switches the water pump On/Off by calculating the data received from the Ultrasonic Sensor. Prints the pump status and MODE in LCD Screen.
Monitor your daily water usage, donate water for remote areas, crop plantation using IoT.
Monitor Sump Pump Level, Softener Salt Level and house water pressure
Automatically turn on the water tap when our hand move near the tap
Design, development, and validate a low-cost, open-source (OS) water testing platform which costs less than commercially available tools.
Track the total volume of water spent and evaluate approx. evaporation rates by temperature, humidity, and pressure to prevent water overuse
In this project, we will interface Gravity Analog TDS Sensor with Arduino Microcontroller and read the value in a 16×2 LCD Display
Automatic water level controller for the submersible pump and overhead tank with 555 timer IC. Also check the underground tank water level.
This project shows how to create a dashboard to monitor pump analytics over time
The soil moisture sensor that gives you percentage of moisture in soil!!!!!
If it detects water, the circuit gives an audible alarm.
Using the Seeed studio's Wio Terminal and Grove - Soil Moisture Sensor, I created a project, and now my flower asks for water.
