How to prevent forest from burning? A small Sigfox signal can prevent natural disasters. We will use an Arduino MKRFOX + a flame detector.
A smartphone App that uses new MIT App Inventor BLE extension to connect with a Feather M0 Bluefruit LE and control up to 6 GP-Os
Easy and useful: An introduction project to get to know the raspberry pi pico.
A 2021 revision of the original MBC design by Fabio Defabis with disk emulation on microSD. Runs CP/M + applications with a VT100 terminal.
Entertain humans and pets alike with paper planes launched by your voice.
Library to use I2C PCF8575 IC with Arduino and ESP8266. This IC can control until 16 digital devices like button or LED with only two pins.
ESP8266 Arduino IDE tutorial, learn how to program the ESP8266 using the Arduino IDE.
Learn how to add a Cellular IoT device to the Raspberry Pi Pico.
Evaluation of the demonstration kit to bring up your own ideas using touch technology.
Pre-choose the OS to boot, even before turning on the computer by toggling a switch. Now you don't have to wait to select the os.
After you read this post, your projects will never run out of power after a power outage.
A wallet-sized, Arduino-compatible 8-bit game system packing a grayscale OLED, a chiptune synthesizer and SD card support
The RP2040 based Pico can be used as a logic analyzer with PIO. The example be expanded to export the results to sigrock and PulseView.
A small, fully featured and cheap wifi module with circuit and PCB designs. let's play with 32 bit microcontrollers.
Control the motion of robot by your mobile, Using TI RSLK kit, MSP432 microcontroller and POLOLU board for power distributon.
Sound sensor construction for the Lane of Things project at Wrigley Field.
Raspberry Pi Pico Projects
A cheap tool for testing Servos, H-Bridges and lot of applications needing square wave signals in different formats
SOFTPWM : DMA+GPIO, not interrupt based, individually controlled, did you ran out of PWM pins?
Train and deploy an audio scene classifier with Wio Terminal and Edge Impulse, send mobile notifications with Blynk.
In this tutorial we are going to setup the Yocto environment, build a basic image and put it on our board.
RoboARM allows a user to move objects using an old analog joystick and record, store, and ultimately repeat routines.
In today’s greenhouses, many parameter measurements are required to monitor and control for the good quality and productivity of plants.
The TinyML Wake Word demo on the Raspberry Pi Pico. A less than $10 wake word!
